ENTER/EXIT PROGRAMMING MODE
84
MAGELLAN™ 900I
Global Suffix
This feature applies to RS-232 (Standard or Wincor-Nixdorf), USB-COM, USB-TEC, and USB
Keyboard interfaces. It specifies the suffix that is added to end of a label transmission.
Three standard options are available below. Contact your dealer for other alternate settings
for this feature.
• No Global Suffix
• CR — Carriage Return
• CR LF — Carriage Return, Line Feed
To set the Global Suffix:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
Global Suffix = No Global Suffix
Global Suffix = CR
Global Suffix = CR LF
031E00(CR)
031E0D00(CR)
031E0D0A00(CR)
To Next Page
Loading...
