AIM ID ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
85
AIM ID
AIM (Automatic Identification Manufacturers) label identifiers are assigned from a globally
standardized list — as opposed to custom label ID characters you select yourself — and can
be included with scanned barcode data. AIM label identifiers consist of three characters as
follows:
• A close brace character (ASCII ‘]’), followed by...
• A code character (see the table below), followed by...
• A modifier character (the modifier character is symbol dependent)
Figure 8. AIM ID
SYMBOLOGY CHAR SYMBOLOGY CHAR SYMBOLOGY CHAR
UPC/EAN E
GS1 Omnidirectional,
GS1 Expanded
e
Plessey
P
Code 39 A Standard 2 of 5 S
QR Code and Micro QR
Q
Codabar F ISBN
X
a
Aztec
z
Interleaved 2 of 5 I
Datamatrix
d
Code 11
H
Code 93 G
PDF417 and MicroPDF
L
Code 128/EAN 128 C
MSI Plessey
M
a. ISBN (X with a 0 modifier character). X is used for all unknown label types.
Prefix SuffixLabel ID Label IDBar Code DataAIM ID
Global AIM ID = Disable
Global AIM ID = Enable
DEFAULT
03A900(CR)
03A901(CR)
To Next Page
Loading...
