Datalogic Magellan 9800i - Mobile Commerce Button Function

Enter/Exit Programming Mode
104 Magellan™ 9800i Scanner
Mobile Commerce Button Function
This feature determines if pushing the Mobile Commerce button toggles the Mobile
Commerce reader on and off, or just turns it on for a short period of time.
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below
. You’ll need to cover any unused bar
codes on this and the facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mo
de bar code.
DEFAULT
046700(CR)
Mobile Commerce Button Function = Toggle
046701(CR)
Mobile Commerce Button Function = Activate with Timeout
046702(CR)
Mobile Commerce Button Function = Always on