Datalogic Magellan 9800i - Auxiliary Port Mode

Enter/Exit Programming Mode
Product Reference Guide 141
Auxiliary Port Mode
Selects the usage for the scanner’s optional auxiliary port. The choices listed below are mutually
exclusive (only one option can be active at a time).
• Disabled — Port is inactive
• External Handheld Input — Supports Datalogic
TM
handheld scanners (QuickScan
TM
1000, QuickScan
TM
6000, PowerScan
TM
) as well as other models such as the Symbol®
HotShot. Call your dealer for more information about supported devices.
NOTE
Cable pinout information for the Aux Port is provided in Appendix B of
this manual. A connected handheld scanner
must be configured to transmit
data as outlined in
Appendix E .
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes
on this
and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
050900(CR)
Auxiliary Port Mode = Disable
050901(CR)
Auxiliary Port Mode = External Handheld Input