Enter/Exit Programming Mode
Product Reference Guide
143
Productivity Index Reporting (PIR) / Cashier Training (CT)
When PIR/CT is enabled, label quality data is appended to decoded data before being presented
to the POS. The PIR feature allows the scanner to provide information to an external computer
indicating how easy the label was to read. CT allows the scanner to provide feedback to the
cashier on how to scan in a more ergonomic fashion.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any unused bar codes
on this
and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
PIR / CT = Disable
PIR / CT = Enable
To Next Page
Loading...
