EasyManua.ls Logo

Datalogic Magellan 9800i - Weighing; Scale Sentry TM Option

Datalogic Magellan 9800i
452 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
8
Magellan™ 9800i Scanner
Weighing
Specifications for scale capacity, settling time, minimum and maximum static weight, zeroing,
and warm-up time are given below. For more information regarding the topic:
Proper Weighing
Te chnique, refer to the Operation and Maintenance section of this manual.
Rated Weight Capacity
The scale’s operational weight capacity is:
30.00 pounds, displayed in 0.01 increments
OR
15.000 kilograms
1
, displayed in 0.005 increments.
Minimum Weight
The minimum weight that can be accurately measured by the scale is 0.02 lb. (0.005 kg).
Maximum Static Weight (Overload)
A maximum static weight of 150 pounds (68 kg) can be sustained by the scale without incurring
damage or degrading performance.
Automatic Zero Maintenance
The scale’s software constantly monitors and adjusts the Zero point as long as the deviation is
within acceptable limits
2
, while compensating for any debris accumulation or removal. During
power-up, the scale automatically re-zeros after verifying that all subsystems are functional.
Additionally, the scale may be manually “zeroed” by pushing the Scale Zero Button located on
the control panel.
Scale Sentry
TM
Option
The optional ScaleSentry feature monitors items placed on the platter to ensure they are not
overhanging and touching non-weighing surfaces. If the system’s infrared (IR) beams sense
items encroaching past the sides of the weigh platter, the speaker will sound a unique tone and/
or the ScaleSentry LED indicator will illuminate to indicate a ScaleSentry error condition.
ScaleSentry optionally blocks the transmission of weight to the host depending on how it is
configured (see
"Scale Sentry" starting on page 129). The scanner/scale can be programmed to
just beep and/or light the LED if there is a ScaleSentry issue. Reference Using the Optional
ScaleSentryTM Feature on page 53 for more ScaleSentry options and details.
1. The scale can also be set at the factory for 9.99 kg max.
2. Acceptable limitis of deviation are set at -0.2 to +0.6 pounds (-0.078kg to 0.23kg), which is -0.67 to +2.0% of total capacity.

Table of Contents

Other manuals for Datalogic Magellan 9800i

Related product manuals