Enter/Exit Programming Mode
188
Magellan™ 9800i Scanner
RS-232 TTL Invert
Enables/disables inversion of TTL.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below which represents the desir
ed setting for this feature. You’ll need to
cover any unused bar codes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
RS-232 TTL Invert = Disable
RS-232 TTL Invert = Enable
To Next Page
Loading...
