Datalogic Magellan 9800i - USB Keyboard and Keyboard Wedge Features; USB Keyboard and Keyboard Wedge Intercharacter Delay

Enter/Exit Programming Mode
212 Magellan™ 9800i Scanner
USB Keyboard and Keyboard Wedge Features
USB Keyboard and Keyboard Wedge Intercharacter Delay
Specifies a time delay between characters.
To set this feature:
1. Scan the
USB Keyboard and Keyboard Wedge Intercharacter Delay bar code.
2. Scan the appropriate characters/digits from the
Keypad in Appendix C that represent the
desired delay. The selectable range for this option is
any decimal value from 00 (no delay)
to 99 in 10 ms increments. A table containing the ASCII Character Set and their corre-
sponding decimal values is available in the inside
back cover of this manual. ASCII param-
eters must be input by scanning decimal digits for each character. Pad all single digit
nu
mbers with leading zero to yield a two-digit entry (00-99). Thus, to set an intercharac-
ter delay of 70ms, bar codes containing the digits ‘0’ and ‘7’ must be scann
ed.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
0287(CR)
Set USB Keyboard/Keyboard Wedge Intercharacter
Delay
DEFAULT
Default setting for this feature is: 01 (10ms)