Datalogic Magellan 9800i - USB Keyboard and Keyboard Wedge Caps Lock State

Enter/Exit Programming Mode
220 Magellan™ 9800i Scanner
USB Keyboard and Keyboard Wedge Caps Lock State
This feature specifies the format in which the scanner sends character data.
Selections are:
Caps Lock OFF — Send character data in normal format
Caps Lock ON — Send character data in reverse case
Shift Lock Mode — Send character data in shifted case. This only applies to Wedge G. For other
interfaces, this setting results in a Caps Lock OFF functionality.
Caps Lock Compensation Mode — This only applies to USB Keyboard. For other interfaces,
this setting results in a Caps Lock OFF functionality.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired selection from the bar codes below. You’ll need to cover any unused bar
codes on this and th
e facing page to ensure that the scanner reads only the bar code you
intend to scan.
3.
Complete the programming sequence by scanning the Enter/Exit Programming Mode bar code.
DEFAULT
030400(CR)
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock OFF
030401(CR)
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock ON
030402(CR)
USB Keyboard and Keyboard Wedge Caps Lock State =
Shift Lock Mode
030403(CR)
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock Comensation