Datalogic Magellan 9800i - Expand UPC-E to EAN-13

Enter/Exit Programming Mode
246 Magellan™ 9800i Scanner
Expand UPC-E to EAN-13
Enables/disables expansion of UPC-E labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this and
the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
040200(CR)
Expand UPC-E to EAN-13 = Disable
040201(CR)
Expand UPC-E to EAN-13 = Enable