Datalogic Magellan 9800i - Expand EAN-8 to EAN-13

Enter/Exit Programming Mode
Product Reference Guide 255
Expand EAN-8 to EAN-13
Enables/disables expansion of EAN/JAN-8 labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this
and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
021B00(CR)
Expand EAN-8 to EAN-13 = Disable
021B01(CR)
Expand EAN-8 to EAN-13 = Enable