Datalogic Magellan 9800i - UPC;EAN Stitch Exact Label Halves

Enter/Exit Programming Mode
266 Magellan™ 9800i Scanner
UPC/EAN Stitch Exact Label Halves
This setting enables the stitching of exact UPC-A/EAN-13 label halves with no overlapping
characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this and
the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
054100(CR)
UPC/EAN Stitch Exact Label Halves = Disable
054101(CR)
UPC/EAN Stitch Exact Label Halves = Enable