Datalogic Magellan 9800i - Addons

Enter/Exit Programming Mode
274 Magellan™ 9800i Scanner
Addons
The scanner is capable of processing different types of addon codes, including:
• 2-Digit Supplemental
• 5-Digit Supplemental
Options are provided on the following pages for your convenience:
• Disable all addons — The scanner will not look for or read addons.
• Optional 2-Digit and 5-Digit Supplemental —
Barcodes can be read which include 2-
Digit or 5-Digit Supplementals, however, it is not required that addons be included in
barcodes.
NOTE
Contact customer support for advanced programming of optional and
conditional addons.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the barcode representing the desired option on this and the following page. You’ll
need to co
ver any unused barcodes on facing pages to ensure that the scanner reads only
the barcode you intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
051000(CR)051100(CR)
Addons = Disable All Addons
051001(CR)051101(CR)
Addons = Optional 2-Digit and 5-Digit Supplemental