Enter/Exit Programming Mode
Product Reference Guide
299
Code 39 Correlation
Enables/disables character correlation for Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused barcodes
on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Code 39 Correlation = Disable
Code 39 Correlation = Enable
To Next Page
Loading...
