Enter/Exit Programming Mode
Product Reference Guide
317
EAN-128 Enable
Enables/disables the ability of the scanner to translate EAN128 labels to the EAN128 data
format.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused barcodes
on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
EAN-128 = Transmit EAN128 labels in Code128 data for-
mat
EAN-128 = Transmit EAN128 labels in EAN128 data format
To Next Page
Loading...
