Datalogic Magellan 9800i - Standard 2 of 5 Length Control

Enter/Exit Programming Mode
362 Magellan™ 9800i Scanner
Standard 2 of 5 Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for Standard 2
of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below.
You’ll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
049700(CR)
Standard 2 of 5 Length Control = Variable Length
049701(CR)
Standard 2 of 5 Length Control = Fixed Length