Datalogic Magellan 9800i - Micro PDF 417 Enable

Enter/Exit Programming Mode
Product Reference Guide 375
Micro PDF 417 Enable
Enables/disables the ability of the scanner to decode Micro PDF 417 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this
and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
034E00(CR)
Micro PDF 417 = Disable
034E01(CR)
Micro PDF 417 = Enable