Datalogic Magellan 9800i - Micro PDF 417 Length 1, Length 2 Programming Instructions

Enter/Exit Programming Mode
Product Reference Guide 377
Micro PDF 417 Length 1, Length 2 Programming Instructions
If Micro PDF 417 Length Control is set to Fixed-Length decoding, this feature specifies Micro
PDF 417 first fixed length. If Micro PDF 417 Length Control is set to Variable-Length
decoding, this feature specifies the minimum label length.
NOTE
This tag is only valid for units with a model ID that supports PDF.
Length 1 is the minimum label length if in variable length mode, or
the f
irst fixed length if in fixed length mode. Length 2 is the maxi-
mum label length if in variable length mode, or the second fixed
length if in f
ixed length mode. Length includes the barcode's data
characters only. Any value > 0366 will be considered to be 0366.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
Set Micro PDF 417 Length 1 or Set Micro PDF 417 Length 2 below.
You’ll need to cover any unused barcodes on t
his and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the
Keypad in Appendix C that represent the desired
label length. The selectable range for this option is 00
01 to 0366. Pad all numbers with
leading zeros to yield a four-digit entry (0001-0366).
4. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
Default setting for this feature = 0001
0350(CR)
Set Micro PDF 417 Length 1
0351(CR)
Set Micro PDF 417 Length 2
Default setting for this feature = 0366