Product Reference Guide
405
Appendix D
microSD Card
microSDHC Compatibility
At the time of this writing, the microSD card interface for this product supports SD-Memory
Card Specifications/ Part 1. Physical Layer Specification; Version 1.01, but the processor MCI
can communicate with SDHC Cards. For example, the scanner can perform the functions
specified in this appendix for the SDA 2.0 specification. Both FAT16 and FAT32 formats are
supported.
Filenames are limited to the 8.3 file naming format (i.e., FILENAME.EXT), and MUST be
capitalized.
microSD Card Insertion
1. Read all of these instructions before starting.
2. Apply power to the scanner.
3. Lift the rubber cover to access the card slot as shown in Figure 60.
Figure 60. SD Card Location
1
2
3
1
microSD Card Slot
2
Rubber Cover
3
microUSB Port
To Next Page
Loading...
