Datalogic PowerScan PBT9501-AR - Set Date and Time

Set Date and Time
Quick Reference Guide 7
Set Date and Time
1. Scan the Enter/Exit Programming barcode below to
set date and time.
ENTER/EXIT PROGRAMMING MODE
2. Scan the Set Date barcode + six digits for Year, Month
and Day (YYMMDD) from the Hex-Numeric Keypad on
page 29.
Set Date
3. Scan Set Time + six digits for Hours, Minutes and Sec-
onds (HHMMSS) from the Hex-Numeric Keypad on
page 29.
Set Time
4. Scan the Enter/Exit Programming barcode to complete.