Rhino II Configuration
18 Rhino™ II
When the VMC is being powered down by IGN, it will typically display
a countdown screen advising the user the remaining time before the
terminal shuts down. The shutdown time as well as whether the
countdown is displayed are both controlled by the configuration file.
Configuration (in \Utilities\UtilConfig.cfg):
• PowerOnMode=1 Sets the Startup/Shutdown mode.
- 0 = IGN or PWR
-1 = IGN and PWR
-3 = AutoOn
• IgnOffDialog=01 Display the shutdown timer window
when IGN is turned off.
-0 = Do not display the window.
- 1 = Display the shutdown timer window.
• IgnOffDlgType=2 Size of the shutdown timer window if
enabled.
- 0 = Full screen display, no user interaction is allowed (not
recommended).
- 1 = Medium size display, user may move the window and
interact with the system.
- 2 = Small size display, user may move the window and
interact with the system.
• IgnStartTimeSec=3 Seconds after IGN goes high before the
VMC begins booting.
• IgnOffDelayTimeSec=15 Seconds after IGN disconnects before
the VMC shuts down.
• DelayPowerKey=100 Milliseconds PWR must be pressed
before the VMC begins booting.
To Next Page
Loading...