Rhino II Configuration
24 Rhino™ II
Pre Settings for Keyboards
These settings apply here for all following keyboard definitions,
however, they can be explicitly overridden in the keyboard definition
for special cases.
RotateScreen
With this you can specify the angle of rotation which is
set by the key function VKX_KB_SCRROTATE. A
maximum of four values are possible
(0=Default-Systemstartup, 1=90°, 2=180°, 3=270°). For
rotation minimum 2 values must be defined. For
example RotateScreen=0,1 is defined, it will be toggled
between these two angles. If the Key isn’t existing or
empty, all 4 values will be set one after another.
Keyname Parameter – Info
FrameImage
BitmapName.bmp,FrameSizeX,FrameSizeY
Bitmap for the Keyboard-Frame and to set the background.
FrameSizeX defines the left and right distance to the keys.
FrameSizeY defines the upper and lower distance to the
keys.
A keyboard without frame can be defined.
TitleBar
0 (=Default)
With 1 the Windows title bar can here be activated for
special cases.
Title
Here, any string can be defined as titles for TitleBar, e.g.
"Soft Keyboard".
Keyname Parameter – Info
To Next Page
Loading...