Rhino II Configuration
26 Rhino™ II
Section [VolumeTouchCtrl]
This section defines the graphics used in the touch screen volume
control.
Section [Fonts]
In this section all fonts used with the keyboard (max. 40) will be
defined.
AutoSnap
0=Off, 1=On (Default), the Snap function – means the
snapping on the screen corners and if there is enough space
also centred on the edges – only works in conjunction with
the option AutoMove=1. To trigger the automatic snapping,
with a short wipe the keyboard must be moved to the right
direction. Only at short wiping movements (< 500 ms) the
Snap function is activated If the movement of the keyboard
takes longer, you can move it to any position (without
snapping). The screen sizes are not supported for snapping.
Background The bitmap displayed as the background of the volume control.
Pointer Bitmap used to indicate the current volume.
MuteIcon When the speaker is muted, this bitmap will be displayed.
Keyname Parameter
Fontname
font name, width, height, Text (3 cols),Shadow (3 cols), shadow
offset (2 cols), format
Keyname Parameter – Info
To Next Page
Loading...