Datalogic Rhino II - Page 33

Rhino II Configuration
User’s Manual 27
The various fields can be assigned as follows:
Example:
FontDef = Arial, 0,26, 0,0,0, 190,190,190, 2,2, B
FontMini = Tahoma, 0,14, 0,0,0, 190,190,190, 0,0,
IB
FontSymbol = Wingdings, 0,29, 0,0,0, 190,190,190,
0,0, B
Fontname
For this keyname any name can be given, according to the
use of fonts. If the font definition will be used later for the
keys, the font must be specified in this section.
Font name Name of the desired and installed Windows system font.
Width
Width 0 will be used as default, so the font is displayed in
its natural width. For special cases the character width
will be stretched or compressed.
Height The height of the font in pixels.
Text- R,G,B
In these 3 fields, the red, green, blue values for the font
colors are defined. For all RGB fields values from 0-255
allowed.
Shadow - R,G,B
In this 3 fields the R,G,B values for shadow colors are
defined.
Shadow offset X,Y Shadow offset in pixels. Setting offset to 0 = no shadow.
Format
If specified, font formatting may be set to italic (I) and/or
bold (B).