Datalogic Rhino II - Page 35

Rhino II Configuration
User’s Manual 29
FrmTxtNormL,T,R,B
Position frame for the text output in normal keys.
With the values L=Left,T=Top,R=Right,B=Bottom
substituting the distances of the text output to the side
edge. This is necessary so that the text will not be
written over the 3D-Frame of a key by left-aligned
output.
FrmTxtActL,T,R,B
Position frame for the text output at active/pressed
keys.
The frame for the active Display will be specified in 1-3
Pixel (depends on key size). In this case the effect of a
pressed key will appear.
FrmIconNormL,T,R,B Position frame for the Icon output of normal keys.
FrmIconActL,T,R,B
Position frame for the Icon output of active/pressed
keys.