Rhino II Configuration
User’s Manual 37
System-Admin and Password-Keyboard
The system admin menu or keyboard is always linked with the
upstream password entry.
The behaviour is defined as follows:
• If the SysAdmin-Menu is not active at pressing the KEY-Button,
always the entry password dialog appear.
• If the SysAdmin-Menu is active at pressing the KEY-Button the
normal Keyboards like usually will be fade in or fade out.
• If the SysAdmin-Menu will be exit, all normal open Keyboards
will be closed automatically.
Both keyboards in the [Common] section of the Keyboard Config be
activated as follows:
SysAdminPwdKB=Num
SysAdminMenKB=Num
For Num the Number of the corresponding Keyboard-configuration
will be specified.
These Special-Keyboards, always should be specified after the
normal Keyboards.
If the Password-Keyboard for example is defined in the Section
[Keyboard_10] the above entry would look like:
SysAdminPwdKB=10.
Attention:
With SysAdmin....KB defined Keyboards, means Keyboards which
will be started at UAC/System- and Login-Sessions will NOT be read
in and therefore they don’t have any meaning.
To Next Page
Loading...