Datalogic Rhino II - Page 45

Rhino II Configuration
User’s Manual 39
Special Settings Password Keyboard
Special Keys for configuration of password keyboards in the
[Keyboard_XX] Section:
Key Default Info
KeyDialog=DlgInputLine
-
To enable the Password entry, this key
is mandatory with the assigned
registry.
KeyDlgPassword=X
-
For X any password can be defined. It
is only important, that all characters of
the password must be defined and
shown in the Password-Keyboard.
KeyDlgText=Text
Password
Input
For Text any text can be entered, which
will prompt the PID input via the input
line.
KeyDlgFont=FontDef
-
Here a Font definition from the Section
[Fonts] can be given. The Text from
KeyDlgText is then output with this.
KeyDlgColor=R,G,B
-
Here the Color value of a typical
Keyboard-Background-Color should be
specified. In this case the displayed
Pwd-Dialog will be output in the same
color.
For the silver-grey Soft-Keyboard it is
for e.g.: 198,198,198.
KeyDlgPwdErr=ErrText
Invalid
Password!
For ErrText any Error-Message can be
defined. This will be shown after a
wrong Pwd-Input in the MsgBox. A line
break can be specified with "\ n".