Datalogic Rhino II - Virtual Keycodes; Special Function Codes

Rhino II Configuration
44 Rhino™ II
Virtual Keycodes
Special Function Codes
The following Function codes can be used to define Keys for special
functions.
VKX_KB_MOVEBUT Moving function for the Keyboard.
VKX_KB_ZOOM
Zoom function for the keyboard. By
pressing this key, the next Zoom level will
be activated. (See
ZoomFactor on
page 25
)
VKX_KB_SWITCHTO=<kbdnum> Switches the keyboard to <kbdnum>.
VKX_KB_HIDE
Deletes the actual keyboard from the
screen.
VKX_KB_KBOPEN=<kbdnum>
Open the dedicated keyboard. The actual
keyboard remains unchanged displayed
(unless it isn’t defined with the Mode
CloseOnClick).
VKX_KB_SCRROTATE
Rotates the screen orientation by 90°. The
orientation actually will not be stored. After
restart the unit will display again the
default orientation.
VKX_KB_UPDO
Change the Keyboard-Position from the
upper edge downward and vice versa. The
vertical X-Position will not change.
VKX_KB_KEYLIGHT
After pressing on this Button the lighting
mode of the HW-Keys will be switched
between the 4 possibilities.
VKX_KB_VOLUMEDLG Open the dialog to set the volume.