Rhino II Configuration
User’s Manual 49
Upgrading the Rhino II WEC7 Firmware
When you upgrade the Rhino II software, you are updating the
operating system (OS), the radio drivers and the Datalogic specific
software.
There are three steps involved to upgrade your Rhino II computer:
1. Download the upgrade cab file from the Datalogic website.
2. Make the upgrade file accessible to the Rhino II computer. This
can be done by;
a. Attaching a USB External storage device, such as a USB
Memory Drive, USB External Hard Disk, or USB External Card
reader.
b. Downloading the file via an Ethernet connection to put the
upgrade file onto the internal disk.
c. Using a shared drive on the network.
3. Double click on the .cab file to install the new firmware.
To Next Page
Loading...