Datalogic Applications
User’s Manual 73
Tasks
Connect to a Device via Network Manually
If DXU Agent on the device has its Enable Discovery Manager
feature enabled and DXU has Automatic Discovery of Devices
enabled under Advanced Settings, then clicking Refresh should
display it in the Available Device list if it is in the same subnet.
However, if you want to manually add a device in DXU, make sure
both device and system are in the same subnet and follow these
steps:
1. From the DXU main window, click Add Device;
2. In the Add Device dialog box, enter the IP address of the device
and optionally its port, if it is has been changed from the default;
NOTE
You will see the IP Address and port details displayed on
the DXU main window along with the model name, serial
number, and an illustration of the device.
To Next Page
Loading...