FUNCTION LIST
INSTRUCTION MANUAL 37
FUNCTION LIST
Programmable models
SG4 EXTENDED programmable models (SG4-P) have two main operating modes: Blank-
ing and Muting. Choosing between Blanking and
Muting changes the function setting
associated to LEDs 5 to 8.
NOTE
Coding 2
Code 1
Code 2
No Code
Muting/Blanking
Selection
3
Muting
Blanking
EDM 4
Enabled
Disabled
Restart Mode 5
Auto
Manual
Muting Direction 6
T (bidirectional)
L (unidirectional)
Muting Timeout 7
10 min
Inf.
Override Trigger 8
Level
Edge
The default configuration is indicated in bold characters.
Since the last 3 LEDs don't change status by passing from a Muting config-
uration to a blanking configuration (and vice versa) and since these 3 LEDs
have 3 different meanings depending on the configuration, the user has to
pay attention to the configuration setting when decides to change configu-
ration.
RX FUNCTION LIST IN MUTING OPERATION MODE
(LED 3 ON YELLOW)
FUNCTION LED # SETTING
LED STATUS
To Next Page
Loading...