Datalogic SG4 Extended Series - EDM Selection

FUNCTIONS
46 SG4 EXTENDED
EDM disabled
When EDM is disabled it's necessary to leave the EDM input floating for SG4-…-P mod-
els. Please refer to 8.1 RESTART MODE for EMD/RESTART line connection on SG4-…-N
mode
ls.
Figure 10 - EDM disabled
EDM SELECTION
This function allows the user to select or exclude the monitoring of the external switch-
ing devices.
Figure 11 - BCM Configuration: EDM Selection
Figure 12 - ACM Configuration: EDM Selection