EasyManua.ls Logo

Datalogic SG4 Extended Series - Muting Timeout

Datalogic SG4 Extended Series
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MUTING
INSTRUCTION MANUAL 53
Figure 24 - BCM Configuration: Muting Direction
Figure 25 - ACM Configuration: Muting direction
Muting timeout
Muting timeout is a time that defines the maximum duration of Muting function; after
the timeout the Muting ends.
This time can be set from the user in both BCM and ACM mode.
In BCM mode the user can select a timeout of 10 minutes or infinite; “infinite” means
tha
t Muting timeout could never end: if the conditions of Muting persist, the Muting
function continues to exist.
This is not compliant with the EN 61496-1: 2013 standard, and the user is warned about
it.
Figure 26 - Muting timeout
In ACM mode, the user can personalize the timeout from 10 minutes to 1080 minutes
(that correspond to 18 hours) with steps of 1 minute; the user can even set infinite tim-
eout.

Table of Contents