Datamars AirStick - Recharging the AirStick Battery

ENG
5
The reader’s battery can be charged using the AC/DC
battery charger or the car charger, while tted in the reader
or on its own.
While the battery is
charging, the red and
green LED indicator will
light and will be steadily
lit. When the battery is
fully charged, the red LED
indicator will turn off and
the green LED indicator
will be steadily lit.
To remove the battery
from the AirStick, push the
battery removal button
and pull out the battery.
To insert the battery into
the AirStick, push it into
the battery housing; an
audible click conrms the
battery has been placed
correctly.
Recharge your AirSck
● AC/DC baery charger
Connect the AC/DC adapter to the plug jack on the
battery, then plug the adapter into a 220 VAC outlet
with the power cord.
● Car charger
Plug one end of the car charger into the plug jack
on the battery, then plug the other end into
the accessory socket of a car.