EasyManua.ls Logo

DataRemote POTS in a BOX CDS-9010 - 4.4 Time Zone and NTP Settings; 4.5 Internet;WAN Connection Setup; 4.5.1 Static IP Configuration

DataRemote POTS in a BOX CDS-9010
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
4.4 Setting up the Time Zone
Open Administration/Management webpage as shown below, please select the Time Zone for the router installed and specify the NTP
server and set the update interval in NTP synchronization.
4.5 Setting up the Internet/WAN Connection
Open the Network/WAN webpage as shown below; please select the appropriate IP Mode according to the information from your ISP.
There are three types offered in this page, which are Static, DHCP and PPPoE.
4.5.1 Static IP
You will receive a fixed public IP address or a public subnet, namely multiple public IP addresses from your DSL or Cable ISP service
providers. In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you

Table of Contents

Related product manuals