DataRemote POTS in a BOX CDS-9010 - 4.8.2 WAN Failover Connection Manager

Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
4.8.2 Connection Manager
Enable
Enable this function, WAN Failover is
based on ping result. Disable this
function, WAN Failover is based on
each interface physical status.
Detect
Interval
Interval time for detecting WAN
connection.
Ping this
WAN’s
Gateway
Ping the IP address of WAN’s gateway.
Ping this IP
The IP address for ping detection
Force WAN
Failover
Enable to setup the re-try times for ping
Max Try
Times for
Ping
Setup the re-try times for ping