DataRemote POTS in a BOX CDS-9010 - Page 36

Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
WAN IP
Mode
The mode for obtain IP address
LAN
Connection
Mode
Select to NAT or Bridge
DNS Mode
Set the DNS Mode from Auto and Manual,
If user choose manual, you should fill the primary DNS
address and Secondary DNS address into Primary DNS
Address and Secondary DNS Address.
Primary DNS
Server
Type in the primary IP address for the route
Secondary
DNS Server
Type in secondary IP address for necessity in the future
PPPoE
Account
Assign a specific valid user name provided by the ISP
PPPoE
Password
Assign a valid password provided by the ISP
Confirm
Password
Input the password again
Service Name
The destination of PPPoE server, Leave empty to auto
detect.
Operation
Mode
Select to Keep Alive, On Demand or Manual
Keep Alive
Redial
Period(0-
3600s)
The interval time for redialing up