DataRemote POTS in a BOX CDS-9010 - 5.3.2 LAN Port Settings

Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
5.3.2 LAN
LAN Port:
The most generic function of router is NAT. What NAT does is to translate the packets from public IP address to local IP address to forward the right
packets to the right host and vice versa.
Local IP Address
Type in local IP address for connecting
to a local private network
Local Subnet Mask
Type in an address code that
determines the size of the network.
Local DHCP Server
If or not enable DHCP server.
DHCP Starting
Address
Enter a value of the IP address pool for
the DHCP server to start with when
issuing IP addresses.
DHCP Ending Address
Enter a value of the IP address pool for
the DHCP server to end with when
issuing IP addresses.
DNS Mode
Set the DNS Mode from Auto and
Manual.
Primary/Secondary
DNS
Input the primary or secondary DNS IP
address.
Client Lease Time
It allows you to set the leased time for
the specified PC.
DHCP Client List
Check which LAN devices are
currently leasing IP addresses.
DHCP Static Allotment
Specify to reserve DHCP addresses.
DNS Proxy
allows clients to use a device as a DNS
proxy server