DataRemote POTS in a BOX CDS-9010 - 5.4 Wireless Network Configuration; 5.4.1 Basic Wireless Setup

Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
5.4 Wireless
5.4.1 Basic
Radio On/Off
Select to enable or disable wireless.
Wireless
Connection Mode
Select to AP or Client. WiFi Client
would be option for Active WAN.
Network Mode
Choose one network mode from the
drop down list.
Multiple SSSD
Set more wireless network.
Broadcast(SSID)
Broadcast or hide the SSID
AP Isolation
Prevents one wireless client
communicating with another wireless
client.
MBSSID AP
Isolation
Other clients outside the AP can not
access the clients under this AP
BSSID
A group of wireless workstations and
a wireless local area network access
point (AP) form a basic access device
(BSS), each computer in the BSS
must be configured with the same
BSSID.
Frequency
Choose channel frequency.
HT Physical
Mode
In HT (High Throughput) Physical
mode setting allow for control of the
802.11n wireless environment.