DataRemote POTS in a BOX CDS-9070 - Page 17

Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 17 of 76
Revision Time: 2016-10-13
have a public subnet, you could assign an IP address to the WAN interface.
WAN IP Mode
The mode for obtain IP address
LAN Connection
Mode
Select to NAT or Bridge
IP Address
Type the IP address
Subnet Mask
Type the subnet mask
Default Gateway
Type the gateway IP address
DNS Mode
Set the DNS Mode from Auto and Manual,
If user choose manual, you should fill the
primary DNS address and Secondary DNS
address into Primary DNS Address and
Secondary DNS Address.
Primary DNS
Server
Type in the primary IP address for the route
Secondary DNS
Server
Type in secondary IP address for necessity in
the future