DataRemote POTS in a BOX CDS-9070 - Wireless Network Configuration

Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 22 of 76
Revision Time: 2016-10-13
4.7 Setting up the Wireless Connection
To set up the wireless connection, please skip the following steps.
4.7.1 Enable Wireless and Setting SSID
Open 2.4G (5G) /Basic webpage as shown below
Radio On/Off
Select to enable or disable wireless.
Wireless
Connection
Mode
Select to AP or Client. WiFi Client
would be option for Active WAN.
Network Mode
Choose one network mode from the
drop down list.
Multiple SSSD
Set more wireless network.
Broadcast(SSID
)
Broadcast or hide the SSID
AP Isolation
prevents one wireless client
communicating with another wireless
client.
MBSSID AP
Isolation
Other clients outside the AP can not
access the clients under this AP
BSSID
A group of wireless workstations and
a wireless local area network access