Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 28 of 76
Revision Time: 2016-10-13
4.9 Register
4.9.1 Get the Accounts
CDS-9070 have 2 phone ports, you can use it to make SIP call, and before registering, you should get the SIP account from you administrator
or provider.
4.9.2 Connections
Connect CDS-9070 to the Internet properly
4.9.3 Configuration SIP from Webpage
Step 1.Open SIP Account/Line 1 webpage, as the picture in the right side.
Step 2. Fill account which get from you administrator into Display Name parameter, Phone Number parameter, and Account parameter.
Step 3.Fill password which get from you administrator into Password parameter.
Step 4.Press button in the bottom of the webpage to save changes.
Note: Please REBOOT to make the changes effective! please press Reboot button to make changes effective. if there is
To Next Page
Loading...
