DataRemote POTS in a BOX CDS-9070 - Vpn;L2 Tp

Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 38 of 76
Revision Time: 2016-10-13
5.3.3 VPN/L2TP
VPDN
VPN Enable
Enable PPTP or L2TP VPN Client
Initial Service IP
VPN server IP address
User Name
The account for authentication
Password
The password for authentication
VPN As Default Route
The remote virtual IP as default
gateway .
MPPE Stateful(PPTP
Only)
Stateless encryption provides a lower
level of performance, but will be more
reliable in a lossy network
environment.
Require MPPE(PPTP
Only)
enable MPPE (Microsoft
Point-to-Point Encryption). It’s a
protocol for encrypting data across
PPP and VPN links.
L2TP Tunnel Name
Enter L2TP Tunnel Name.
L2TP Tunnel Password
Enter L2TP tunnel password in this
item.