Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 66 of 76
Revision Time: 2016-10-13
Allow host remote access from Active
WAN
Enter the HTTP port number for
accessing from local side
Enter the HTTP port number for
accessing from remote side
Web Idle Timeout(0
-60min)
Timeout for web idle activity
Allowed Remote
IP(IP1;IP2;...)
Allow the host with specified IP
address to access from webpage.
Select this option if you want to
synchronize the router's clock to a
Network Time Server over the
Internet.
Obtain NTP Server via DHCP Server
Displays the time currently maintained
by the router.
Synchronize with your current host's
system time
Select your local time zone from pull
down menu.
Type the primary Network Time
Server for synchronization.
Type the secondary Network Time
Server for synchronization.
NTP synchronization(1
-1440min)
Interval time for NTP synchronization.