DataRemote POTS in a BOX CDS-9070 - Firmware Upgrade

Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 67 of 76
Revision Time: 2016-10-13
Reset to Factory Default
This option restores all configuration
settings back to the settings that were in
effect at the time the router was shipped
from the factory. Any settings that have
not been saved will be lost.
5.9.2 Firmware Upgrade
Once you have a firmware update on your
computer, use this option to browse for
the file and then upload the information
into the router.