4.9 Register
4.9.1 Get the Accounts
CDS-9090 has eight RJ-11 phone ports, you can use it to make SIP call, and before registering, you should get the SIP account from you
administrator or provider.
4.9.2 Connections
Connect CDS-9090 to the Internet properly
4.9.3 Configuration SIP from Webpage
Step 1.Open SIP Account/Line 1 webpage, as the picture in the right side.
Step 2. Fill account which get from you administrator into Display Name parameter, Phone Number parameter, and Account parameter.
Step 3.Fill password which get from you administrator into Password parameter.
Step 4.Press button in the bottom of the webpage to save changes.
Note: if there is Please REBOOT to make the changes effective! please press Reboot button to make changes effective.
To Next Page
Loading...
