DataRemote Pots In a Box CDS-9090 - Time;Date Settings; Reset to Factory Default

Time/Date Settings
NTP Enable
Select this option if you want to
synchronize the router's clock to a
Network Time Server over the
Internet.
Option 42
Obtain NTP Server via DHCP Server
Current Time
Displays the time currently maintained
by the router.
Sync with host
Synchronize with your current host's
system time
NTP Settings
Select your local time zone from pull
down menu.
Primary NTP Server
Type the primary Network Time
Server for synchronization.
Secondary NTP Server
Type the secondary Network Time
Server for synchronization.
NTP synchronization(1 -
1440min)
Interval time for NTP synchronization.
Reset to Factory Default
This option restores all configuration
settings back to the settings that were in
effect at the time the router was shipped
from the factory. Any settings that have
not been saved will be lost.