DATATRAC 400H Setup Instructions To Clear GPS NVM
Receiver SETUP
1. Press “RCV” Key
a. “RECEIVER SETUP” page displays
2. On the “RECEIVER SETUP” page
a. Channel: 1
b. On/Off: ON
c. Bus speed : 100
d. Select LBLS: EDIT
e. Equip ID: 000
f. Data Format: BIN19L
g. Interval: INST
h. RCV Download: NONE
i. Display Lines: 03
j. Bus Monitor: 2
Note: Use “^””v” to move to next/previous line
Use “>” To step through options
Use Keypad to enter alphanumeric entries
To Next Page
Loading...