Datavideo RMC-180 MARK II User Manual

7
1. Introduction
Please take a few minutes to read this manual thoroughly to get more value out of your equipment
as this will help you familiarise yourself with all aspects of the controller.
1.1 Features
 Remote control of up to four Pan, Tilt and Zoom cameras
 Pan, Tilt and Zoom with speed control by joystick
 Control of Pan, Tilt and Zoom as well as Iris, Focus, Gain, and other functions over Ethernet
 Multiple presets for PTZ settings for each individual camera
 Full remote control of each camera via serial communication over affordable network
cabling
 Compatible with Datavideo's switcher tally indicators
 Compact design for easy installation
 Easy integration with Datavideo HD switchers for an affordable multi-camera solution.
1.2 Compatible Camera Models
Camera models compatible with the RMC-180 MARK II are provided in the list below.
 BC-80
 BC-200
 BC-200T
 PTC-140
 PTC-140NDI
 PTC-140T
 PTC-140TH
 PTC-150
 PTC-150T
 PTC-200
 PTC-200T
 PTC-280
1.3 Compatible Camera Control Protocol
Depending on your chosen PTZ camera(s), the following control protocols are available.
 SONY VISCA
Please note that a firmware update may be required to switch your RMC-180 MARK II to the same
protocol as the camera you wish to control. All units are initially supplied with the VISCA protocol
as this works with the Datavideo’s Block/PTZ cameras.

Datavideo RMC-180 MARK II Specifications

General

Brand	Datavideo
Model	RMC-180 MARK II
Category	Controller
Language	English