EasyManua.ls Logo

Dateq SPL 2 - Technical Specifications; Product Support Information

Dateq SPL 2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Introduction
SPL2(TS) and SPL3(TS) user manual
EN
Technical specifications
INPUTS
MIC (measuring microphone).......................... XLR-3 female, electronically balanced, use only the
supplied microphone
LINE (left & right) ............................................ XLR-3 female, electronically balanced
Signal level ............................................ -14 .. +6 dBu
Input impedance .................................... 10 kOhm
OUTPUTS
LINE (left & right) ............................................ XLR-3 male, electronically balanced
Output impedance ................................. 600 Ohm
GENERAL
AUDIO
Frequency response .............................. 20 Hz .. 20 kHz
Signal/noise ratio ................................... > 80 dB
THD+N .................................................. < 0.05 % (CCIR-RMS)
LIMITING
Limiter threshold (adjustable)................. -14 .. +6 dBu (without measuring microphone)
Limiter threshold (adjustable)................. 80 .. 120 dBA (with measuring microphone)
Output reduction (adjustable)................. 0 .. -40 dB (without measuring microphone)
EXTERNAL SIGNALLING
External attenuation............................... 0 .. -20 dB (10 kOhm variable resistor)
Signalling- and switch outputs................ 20 V / 10 mA DC
POWER SUPPLY
Supply voltage ....................................... 220...240 VAC / 50 Hz
Power consumption ............................... 10 W (SPL2 / SPL3), 20 W (SPL2TS / SPL3TS)
SIZE AND WEIGHT
Front ...................................................... 483 x 45 mm (B x H) = 19”, 1HE
Depth..................................................... 175 mm
Weight (net.) .......................................... 3.2 kg (SPL2 / SPL3), 3.5 kg (SPL2TS / SPL3TS)
Product support
For questions about the SPL limiter series, accessories and other products, please contact:
Dateq Audio Technologies B.V.
De Paal 37
1351 JG ALMERE
The Netherlands
Telephone: +31 36 54 72 222
Fax: +31 36 53 17 776
E-mail: info@dateq.nl
Internet: www.dateq.nl